checkCIF (basic structural check) running
	Checking for embedded fcf data in CIF ... 
	No extractable fcf data in found in CIF
	checkCIF/PLATON (basic structural check)
You have not supplied any structure factors. As a result the full set of tests cannot be run.THIS REPORT IS FOR GUIDANCE ONLY. IF USED AS PART OF A REVIEW PROCEDURE FOR PUBLICATION, IT SHOULD NOT REPLACE THE EXPERTISE OF AN EXPERIENCED CRYSTALLOGRAPHIC REFEREE.
You have not supplied any structure factors. As a result the full set of tests cannot be run.No syntax errors found.                               CIF dictionary
Please wait while processing ....                     Interpreting this report
 Structure factor report
Datablock: cu_BruecknerJK_153F40_0m
| Bond precision: | C-C = 0.0031 A | Wavelength=1.54178 | 
| Cell: | a=19.678(3) | b=37.0229(9) | c=4.7720(4) | 
|  | alpha=90 | beta=90 | gamma=90 | 
| Temperature: | 102 K |  |  | 
|  | Calculated | Reported | 
| Volume | 3476.6(6) | 3476.6(7) | 
| Space group | P 21 21 2 | P 21 21 2 | 
| Hall group | P 2 2ab | P 2 2ab | 
| Moiety formula | 2(C38 H38 O12), C H4 O | ? | 
| Sum formula | C77 H80 O25 | C38.50 H40 O12.50 | 
| Mr | 1405.41 | 702.70 | 
| Dx,g cm-3 | 1.343 | 1.343 | 
| Z | 2 | 4 | 
| Mu (mm-1) | 0.838 | 0.838 | 
| F000 | 1484.0 | 1484.0 | 
| F000' | 1489.09 |  | 
| h,k,lmax | 25,47,6 | 24,47,5 | 
| Nref | 7449[  4339] | 7338 | 
| Tmin,Tmax | 0.904,0.967 | 0.770,0.929 | 
| Tmin' | 0.832 |  | 
| Correction method= # Reported   T Limits: Tmin=0.770              Tmax=0.929  AbsCorr = MULTI-SCAN |  | 
| Data completeness= 1.69/0.99 | Theta(max)= 78.476 | 
| R(reflections)= 0.0364(  7290) | wR2(reflections)= 0.0919(  7338) | 
The following ALERTS were generated. Each ALERT has the format
       test-name_ALERT_alert-type_alert-level.
Click on the hyperlinks for more details of the test.
 Alert level C
PLAT413_ALERT_2_C Short Inter XH3 .. XHn     H13      ..H19B     .       2.14 Ang.  
                                                   x,y,-1+z  =      1_554 Check
Alert level C
PLAT413_ALERT_2_C Short Inter XH3 .. XHn     H13      ..H19B     .       2.14 Ang.  
                                                   x,y,-1+z  =      1_554 Check 
 Alert level G
PLAT005_ALERT_5_G No Embedded Refinement Details Found  in the CIF     Please Do !  
PLAT007_ALERT_5_G Number of Unrefined Donor-H Atoms ..............          1 Report
PLAT045_ALERT_1_G Calculated and Reported Z Differ by a Factor ...       0.50 Check 
PLAT300_ALERT_4_G Atom Site Occupancy of O13        Constrained at        0.5 Check 
PLAT302_ALERT_4_G Anion/Solvent/Minor-Residue Disorder (Resd  2  )       100% Note  
PLAT398_ALERT_2_G Deviating  C-O-C    Angle From 120 for O3             109.2 Degree
PLAT432_ALERT_2_G Short Inter X...Y Contact  O2       ..C17              2.91 Ang.  
                                            -1/2+x,1/2-y,-z  =      4_455 Check 
PLAT789_ALERT_4_G Atoms with Negative _atom_site_disorder_group  #          6 Check 
PLAT791_ALERT_4_G Model has Chirality at C1          (Sohnke SpGr)          S Verify
PLAT860_ALERT_3_G Number of Least-Squares Restraints .............          5 Note
Alert level G
PLAT005_ALERT_5_G No Embedded Refinement Details Found  in the CIF     Please Do !  
PLAT007_ALERT_5_G Number of Unrefined Donor-H Atoms ..............          1 Report
PLAT045_ALERT_1_G Calculated and Reported Z Differ by a Factor ...       0.50 Check 
PLAT300_ALERT_4_G Atom Site Occupancy of O13        Constrained at        0.5 Check 
PLAT302_ALERT_4_G Anion/Solvent/Minor-Residue Disorder (Resd  2  )       100% Note  
PLAT398_ALERT_2_G Deviating  C-O-C    Angle From 120 for O3             109.2 Degree
PLAT432_ALERT_2_G Short Inter X...Y Contact  O2       ..C17              2.91 Ang.  
                                            -1/2+x,1/2-y,-z  =      4_455 Check 
PLAT789_ALERT_4_G Atoms with Negative _atom_site_disorder_group  #          6 Check 
PLAT791_ALERT_4_G Model has Chirality at C1          (Sohnke SpGr)          S Verify
PLAT860_ALERT_3_G Number of Least-Squares Restraints .............          5 Note  
   0 ALERT level A = Most likely a serious problem - resolve or explain
   0 ALERT level B = A potentially serious problem, consider carefully
   1 ALERT level C = Check. Ensure it is not caused by an omission or oversight
  20 ALERT level G = General information/check it is not something unexpected
   1 ALERT type 1 CIF construction/syntax error, inconsistent or missing data
   3 ALERT type 2 Indicator that the structure model may be wrong or deficient
   1 ALERT type 3 Indicator that the structure quality may be low
  14 ALERT type 4 Improvement, methodology, query or suggestion
   2 ALERT type 5 Informative message, check
Validation response formPlease find below a validation response form (VRF) that can be filled in and pasted into your CIF.
# start Validation Reply Form
_vrf_PLAT413_cu_BruecknerJK_153F40_0m
;
PROBLEM: Short Inter XH3 .. XHn     H13      ..H19B     .       2.14 Ang.  
RESPONSE: ...
;
# end Validation Reply Form
| It is advisable to attempt to resolve as many as possible of the alerts in all categories. 
Often the minor alerts point to easily fixed oversights, errors and omissions in your 
CIF or refinement strategy, so attention to these fine details can be worthwhile. 
In order to resolve some of the more serious problems it may be necessary to 
carry out additional measurements or structure refinements. However, 
the purpose of your study may justify the reported deviations and the more 
serious of these should normally be commented upon in the discussion or 
experimental section of a paper or in the "special_details" fields of the CIF. 
checkCIF was carefully designed to identify outliers and unusual parameters, 
but every test has its limitations and alerts that are not important in a particular 
case may appear. Conversely, the absence of alerts does not guarantee there are 
no aspects of the results needing attention. It is up to the individual to 
critically assess their own results and, if necessary, seek expert advice.Publication of your CIF in IUCr journals 
A basic structural check has been run on your CIF.
These basic checks will be run on all CIFs submitted for publication in
IUCr journals (Acta Crystallographica, Journal of Applied Crystallography,
Journal of Synchrotron Radiation); however, if you intend to submit to Acta
Crystallographica Section C or E or IUCrData, you should make sure that
full publication
checks are run on the final version of your CIF prior to submission.Publication of your CIF in other journals Please refer to the Notes for Authors of the relevant journal for any special instructions relating to CIF submission.
 | 
PLATON version of 18/09/2020; check.def file version of 20/08/2020
| Datablock cu_BruecknerJK_153F40_0m - ellipsoid plot | 
|   | 
 Download CIF editor (publCIF) from the IUCr 
 Download CIF editor (enCIFer) from the CCDC 
 Test a new CIF entry